Insulation level: 130C ° C
Soflex® PET-PET is a composite material consisting of two to three layers of polyester film coated with an adhesive.
Basic characteristics
• Excellent mechanical toughness
• Good dielectric strength
Insulation level: 130C ° C
Soflex® PET-PET is a composite material consisting of two to three layers of polyester film coated with an adhesive.
Basic characteristics
• Excellent mechanical toughness
• Good dielectric strength
Soflex® PET-PET is a composite material consisting of two to three layers of polyester film coated with an adhesive and is suitable for insulating high-voltage and low-voltage coils of resin-cast transformers.
Thickness (mm) | Standard width (mm) | Standard width (mm) | Standard width (mm) |
0.50 | 800 | 1000 | 1200 |
0.70 | 800 | 1000 | 1200 |
1.10 | 800 | 1000 | 1200 |
1.40 | 800 | 1000 | 1200 |
Soflex® PET-PET tubing cores with an inside diameter of 3 inches can be supplied in full rolls or cut into strip trays or flakes in lengths to suit the customer's requirements.
Suitable for resin cast transformer high and low voltage coils as insulation cylinder, can also be used as slot insulation, turn-to-turn insulation and liner insulation on the motor, not suitable for stamping and molding, prone to delamination phenomenon.
Storage suggestions
1. Store in a dry and clean room at room temperature.
2. Do not approach sources of fire, heating, or direct sunlight.
3. The storage period is generally 12 months. If it exceeds the storage period and passes the technical standard inspection, it can still be used.
